C3562 DTC For Mg Rover
Mg Rover Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Mg Rover engine control system detects a problem, the computer stores the diagnostic trouble
code C3562 in its memory.
To figure out what is wrong with your vehicle you must first extract the C3562 DTC For Mg Rover.
On 1999 and later C3562 Mg Rover engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
C3562 Mg Rover DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 3 |
SAE - Generic |
| 5 |
Auxiliary Emission Controls |
| 6 |
Vehicle Speed Output Circuit |
| 2 |
Kick-Down Switch Failed Short |
When you turn on the ignition, the Service Engine Soon or Check Engine C3562 Mg Rover light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If C3562 DTC For Mg Rover so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the C3562!
You can also check other Mg car models :
|
The listed Mg models will give information about C3562 DTC.
|
