C3608 DTC For Ford St
Ford St Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Ford St engine control system detects a problem, the computer stores the diagnostic trouble
code C3608 in its memory.
To figure out what is wrong with your vehicle you must first extract the C3608 DTC For Ford St.
To solve C3608 Ford St problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
C3608 Ford St DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 3 |
SAE - Generic |
| 6 |
Vehicle Speed Control And Idle Control System |
| 0 |
Air Conditioning (A/C) Clutch Feedback Circuit High Voltage |
| 8 |
Park/Neutral Postion (PNP) Switch Circuit Engine Torque Signal Circuit |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the C3608 Ford St code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Ford car models :
|
The listed Ford models will give information about C3608 DTC.
|
