C3685 DTC For Rolls Royce Silver Seraph
Rolls Royce Silver Seraph Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Rolls Royce Silver Seraph engine control system detects a problem, the computer stores the diagnostic trouble
code C3685 in its memory.
To figure out what is wrong with your vehicle you must first extract the C3685 DTC For Rolls Royce Silver Seraph.
On 1999 and later C3685 Rolls Royce Silver Seraph engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
C3685 Rolls Royce Silver Seraph DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 3 |
SAE - Generic |
| 6 |
Vehicle Speed Control And Idle Control System |
| 8 |
Crankshaft Position Sensor Circuit Performance |
| 5 |
Cruise Inhibit Control Circuit |
When you turn on the ignition, the Service Engine Soon or Check Engine C3685 Rolls Royce Silver Seraph light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If C3685 DTC For Rolls Royce Silver Seraph so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the C3685!
You can also check other Rolls car models :
|
The listed Rolls models will give information about C3685 DTC.
|
