C3712 DTC For Reliant Scimitar
Reliant Scimitar Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | W-Type Engine |
Engine Air Intake Process : | Naturally Aspirated |
Your Reliant Scimitar engine control system detects a problem, the computer stores the diagnostic trouble
code C3712 in its memory.
To figure out what is wrong with your vehicle you must first extract the C3712 DTC For Reliant Scimitar.
To solve C3712 Reliant Scimitar problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
C3712 Reliant Scimitar DTC Meaning
C |
Chassis Code - Problem is controller area network wiring bus and modules. |
3 |
SAE - Generic |
7 |
Ignition System Or Misfire |
1 |
IC Circuit High Voltage |
2 |
Kick-Down Switch Failed Short |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. C3712 Reliant Scimitar code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Reliant car models :
The listed Reliant models will give information about C3712 DTC.
|