C3970 DTC For Rover 600
Rover 600 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposite Piston Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Rover 600 engine control system detects a problem, the computer stores the diagnostic trouble
code C3970 in its memory.
To figure out what is wrong with your vehicle you must first extract the C3970 DTC For Rover 600.
On 1999 and later C3970 Rover 600 engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
C3970 Rover 600 DTC Meaning
| C |
Chassis Code - Problem is controller area network wiring bus and modules. |
| 3 |
SAE - Generic |
| 9 |
Transmission |
| 7 |
Exhaust Gas Recirculation System Valve 1 |
| 0 |
Transmission Engaged At High Throttle Angle |
If your C3970 Rover 600 check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system C3970 and engine control unit are in charge of monitoring a bunch of different C3970 DTC For Rover 600, and if they get a reading that's a little out of whack, up pops the check engine light.
You can also check other Rover car models :
|
The listed Rover models will give information about C3970 DTC.
|
