DF072 DTC For Mercedes Cla 180
Mercedes Cla 180 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Mercedes Cla 180 engine control system detects a problem, the computer stores the diagnostic trouble
code DF072 in its memory.
To figure out what is wrong with your vehicle you must first extract the DF072 DTC For Mercedes Cla 180.
To solve DF072 Mercedes Cla 180 problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
DF072 Mercedes Cla 180 DTC Meaning
| D |
Chassis Code - Problem is controller area network wiring bus and modules. |
| F |
SAE - Generic |
| 0 |
Transmission |
| 7 |
Exhaust Gas Recirculation System Valve 1 |
| 2 |
Kick-Down Switch Failed Short |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. DF072 Mercedes Cla 180 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Mercedes car models :
|
The listed Mercedes models will give information about DF072 DTC.
|
