P0130 DTC For Toyota Lite Ace
Toyota Lite Ace Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | W-Type Engine |
Engine Air Intake Process : | Turbocharged Engine |
Your Toyota Lite Ace engine control system detects a problem, the computer stores the diagnostic trouble
code P0130 in its memory.
To figure out what is wrong with your vehicle you must first extract the P0130 DTC For Toyota Lite Ace.
On 1999 and later P0130 Toyota Lite Ace engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
P0130 Toyota Lite Ace DTC Meaning
P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
0 |
SAE - Generic |
1 |
Fuel And Air Metering |
3 |
Low Coolant Circuit |
0 |
Transmission Engaged At High Throttle Angle |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P0130 Toyota Lite Ace code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Toyota car models :
The listed Toyota models will give information about P0130 DTC.
|