P0134 DTC For Toyota Mr2 Spyder
Toyota Mr2 Spyder Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposite Piston Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Toyota Mr2 Spyder engine control system detects a problem, the computer stores the diagnostic trouble
code P0134 in its memory.
To figure out what is wrong with your vehicle you must first extract the P0134 DTC For Toyota Mr2 Spyder.
To solve P0134 Toyota Mr2 Spyder problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
P0134 Toyota Mr2 Spyder DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 0 |
SAE - Generic |
| 1 |
Fuel And Air Metering |
| 3 |
Low Coolant Circuit |
| 4 |
Cruise Vehicle Speed/Set Speed Difference Too High |
If your vehicle failed a P0134 Toyota Mr2 Spyder test and the P0134 Check Engine Light is NOT on, chances are you have a problem with the OBDII system, a burned out MIL lamp, or a faulty catalytic converter. The converter is essentially an afterburner that cleans up the exhaust after it exits the engine. The OBDII system uses P0134 a ownstream oxygen sensor to monitor the efficiency of the converter, and it should detect a drop in converter efficiency if the converter has been contaminated or is failing (ignition misfiring, leaky exhaust valves, and oil burning can all damage the converter). What you want to look P0134 DTC For Toyota Mr2 Spyder: Any conditions that might cause ignition misfire, an overly rich or lean fuel condition, or loss of compression.
You can also check other Toyota car models :
|
The listed Toyota models will give information about P0134 DTC.
|
