P01CF DTC For Mercedes Benz 280
Mercedes Benz 280 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Mercedes Benz 280 engine control system detects a problem, the computer stores the diagnostic trouble
code P01CF in its memory.
To figure out what is wrong with your vehicle you must first extract the P01CF DTC For Mercedes Benz 280.
To solve P01CF Mercedes Benz 280 problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
P01CF Mercedes Benz 280 DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 0 |
SAE - Generic |
| 1 |
Fuel And Air Metering |
| C |
BBV Sensor Circuit Low Voltage |
| F |
TFP Valve Position Switch-Drive Without Drive Ratio |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P01CF Mercedes Benz 280 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Mercedes car models :
|
The listed Mercedes models will give information about P01CF DTC.
|
