P02C9 DTC For Bmw 1m
Bmw 1m Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Bmw 1m engine control system detects a problem, the computer stores the diagnostic trouble
code P02C9 in its memory.
To figure out what is wrong with your vehicle you must first extract the P02C9 DTC For Bmw 1m.
On 1999 and later P02C9 Bmw 1m engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
P02C9 Bmw 1m DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 0 |
SAE - Generic |
| 2 |
Computer And Auxiliary Outputs |
| C |
BBV Sensor Circuit Low Voltage |
| 9 |
A/C System High Pressure High Temperature |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the P02C9 Bmw 1m code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Bmw car models :
|
The listed Bmw models will give information about P02C9 DTC.
|
