P05A1 DTC For Mg Ex E
Mg Ex E Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Mg Ex E engine control system detects a problem, the computer stores the diagnostic trouble
code P05A1 in its memory.
To figure out what is wrong with your vehicle you must first extract the P05A1 DTC For Mg Ex E.
A good ground connection is also extremely important. P05A1 Mg Ex E engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
P05A1 Mg Ex E DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 0 |
SAE - Generic |
| 5 |
Auxiliary Emission Controls |
| A |
BBV Sensor Circuit Low Voltage |
| 1 |
PCM Stack Overrun |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P05A1 Mg Ex E code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Mg car models :
|
The listed Mg models will give information about P05A1 DTC.
|
