P060C Volvo V70 Ii DTC Code

Volvo V70 Ii Engine Specifications:

Engine Type :	Multi-Cylinder Engine
Cylinder Type :	W-Type Engine
Engine Air Intake Process :	Supercharged Engine

Your Volvo V70 Ii engine control system detects a problem, the computer stores the diagnostic trouble code P060C in its memory. To figure out what is wrong with your vehicle you must first extract the P060C DTC For Volvo V70 Ii.

To solve P060C Volvo V70 Ii problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs

P060C Volvo V70 Ii DTC Meaning

P	Powertrain Code - Problem is related engine, transmission and emissions systems.
0	SAE - Generic
6	Vehicle Speed Control And Idle Control System
0	Air Conditioning (A/C) Clutch Feedback Circuit High Voltage
C	TFP Valve Position Switch-Drive Without Drive Ratio

There are currently two main types of cylinder deactivation used today, depending on the type of engine. P060C Volvo V70 Ii code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.