P06E4 DTC For Bmw X2
Bmw X2 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Bmw X2 engine control system detects a problem, the computer stores the diagnostic trouble
code P06E4 in its memory.
To figure out what is wrong with your vehicle you must first extract the P06E4 DTC For Bmw X2.
On 1999 and later P06E4 Bmw X2 engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
P06E4 Bmw X2 DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 0 |
SAE - Generic |
| 6 |
Vehicle Speed Control And Idle Control System |
| E |
BBV Sensor Circuit Low Voltage |
| 4 |
Cruise Vehicle Speed/Set Speed Difference Too High |
When you turn on the ignition, the Service Engine Soon or Check Engine P06E4 Bmw X2 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If P06E4 DTC For Bmw X2 so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the P06E4!
You can also check other Bmw car models :
|
The listed Bmw models will give information about P06E4 DTC.
|
