P0707 DTC For Volkswagen Commercial
Volkswagen Commercial Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Volkswagen Commercial engine control system detects a problem, the computer stores the diagnostic trouble
code P0707 in its memory.
To figure out what is wrong with your vehicle you must first extract the P0707 DTC For Volkswagen Commercial.
On 1999 and later P0707 Volkswagen Commercial engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
P0707 Volkswagen Commercial DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 0 |
SAE - Generic |
| 7 |
Ignition System Or Misfire |
| 0 |
Air Conditioning (A/C) Clutch Feedback Circuit High Voltage |
| 7 |
Cruise Control System - Vehicle Accel Too High |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P0707 Volkswagen Commercial code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Volkswagen car models :
|
The listed Volkswagen models will give information about P0707 DTC.
|
