P0766 DTC For Toyota Sprinter
Toyota Sprinter Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposite Piston Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Toyota Sprinter engine control system detects a problem, the computer stores the diagnostic trouble
code P0766 in its memory.
To figure out what is wrong with your vehicle you must first extract the P0766 DTC For Toyota Sprinter.
To solve P0766 Toyota Sprinter problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
P0766 Toyota Sprinter DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 0 |
SAE - Generic |
| 7 |
Ignition System Or Misfire |
| 6 |
Vehicle Speed Output Circuit |
| 6 |
Transmission Control Module Reprogrammable Memory |
If your vehicle failed a P0766 Toyota Sprinter test and the P0766 Check Engine Light is NOT on, chances are you have a problem with the OBDII system, a burned out MIL lamp, or a faulty catalytic converter. The converter is essentially an afterburner that cleans up the exhaust after it exits the engine. The OBDII system uses P0766 a ownstream oxygen sensor to monitor the efficiency of the converter, and it should detect a drop in converter efficiency if the converter has been contaminated or is failing (ignition misfiring, leaky exhaust valves, and oil burning can all damage the converter). What you want to look P0766 DTC For Toyota Sprinter: Any conditions that might cause ignition misfire, an overly rich or lean fuel condition, or loss of compression.
You can also check other Toyota car models :
|
The listed Toyota models will give information about P0766 DTC.
|
