P07A1 DTC For Austin Healey 100
Austin Healey 100 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Austin Healey 100 engine control system detects a problem, the computer stores the diagnostic trouble
code P07A1 in its memory.
To figure out what is wrong with your vehicle you must first extract the P07A1 DTC For Austin Healey 100.
To solve P07A1 Austin Healey 100 problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
P07A1 Austin Healey 100 DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 0 |
SAE - Generic |
| 7 |
Ignition System Or Misfire |
| A |
BBV Sensor Circuit Low Voltage |
| 1 |
PCM Stack Overrun |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P07A1 Austin Healey 100 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Austin car models :
|
The listed Austin models will give information about P07A1 DTC.
|
