P08A0 DTC For Bentley S3
Bentley S3 Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | W-Type Engine |
Engine Air Intake Process : | Supercharged Engine |
Your Bentley S3 engine control system detects a problem, the computer stores the diagnostic trouble
code P08A0 in its memory.
To figure out what is wrong with your vehicle you must first extract the P08A0 DTC For Bentley S3.
To solve P08A0 Bentley S3 problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
P08A0 Bentley S3 DTC Meaning
P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
0 |
SAE - Generic |
8 |
Accelerator Pedal Position (APP) Sensor 1 Performance |
A |
BBV Sensor Circuit Low Voltage |
0 |
Transmission Engaged At High Throttle Angle |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P08A0 Bentley S3 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Bentley car models :
The listed Bentley models will give information about P08A0 DTC.
|