P0A10 DTC For Frazer Nash Targa
Frazer Nash Targa Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Frazer Nash Targa engine control system detects a problem, the computer stores the diagnostic trouble
code P0A10 in its memory.
To figure out what is wrong with your vehicle you must first extract the P0A10 DTC For Frazer Nash Targa.
To solve P0A10 Frazer Nash Targa problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
P0A10 Frazer Nash Targa DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 0 |
SAE - Generic |
| A |
Transmission |
| 1 |
IC Circuit High Voltage |
| 0 |
Transmission Engaged At High Throttle Angle |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P0A10 Frazer Nash Targa code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Frazer car models :
|
The listed Frazer models will give information about P0A10 DTC.
|
