P0A37 DTC For Proton Gen2
Proton Gen2 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Proton Gen2 engine control system detects a problem, the computer stores the diagnostic trouble
code P0A37 in its memory.
To figure out what is wrong with your vehicle you must first extract the P0A37 DTC For Proton Gen2.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check P0A37 Proton Gen2 that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
P0A37 Proton Gen2 DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 0 |
SAE - Generic |
| A |
Transmission |
| 3 |
Low Coolant Circuit |
| 7 |
Cruise Control System - Vehicle Accel Too High |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P0A37 Proton Gen2 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Proton car models :
|
The listed Proton models will give information about P0A37 DTC.
|
