P1138 DTC For Citroen Jumpy Iii
Citroen Jumpy Iii Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Citroen Jumpy Iii engine control system detects a problem, the computer stores the diagnostic trouble
code P1138 in its memory.
To figure out what is wrong with your vehicle you must first extract the P1138 DTC For Citroen Jumpy Iii.
On 1999 and later P1138 Citroen Jumpy Iii engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
P1138 Citroen Jumpy Iii DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 1 |
MFG - Manufacturer Specific |
| 1 |
Fuel And Air Metering |
| 3 |
Low Coolant Circuit |
| 8 |
Park/Neutral Postion (PNP) Switch Circuit Engine Torque Signal Circuit |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the P1138 Citroen Jumpy Iii code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Citroen car models :
|
The listed Citroen models will give information about P1138 DTC.
|
