P1164 DTC For Citroen Jumper
Citroen Jumper Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Citroen Jumper engine control system detects a problem, the computer stores the diagnostic trouble
code P1164 in its memory.
To figure out what is wrong with your vehicle you must first extract the P1164 DTC For Citroen Jumper.
A good ground connection is also extremely important. P1164 Citroen Jumper engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
P1164 Citroen Jumper DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 1 |
MFG - Manufacturer Specific |
| 1 |
Fuel And Air Metering |
| 6 |
Vehicle Speed Output Circuit |
| 4 |
Cruise Vehicle Speed/Set Speed Difference Too High |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P1164 Citroen Jumper code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Citroen car models :
|
The listed Citroen models will give information about P1164 DTC.
|
