P116A DTC For Citroen C3 Aircross
Citroen C3 Aircross Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Citroen C3 Aircross engine control system detects a problem, the computer stores the diagnostic trouble
code P116A in its memory.
To figure out what is wrong with your vehicle you must first extract the P116A DTC For Citroen C3 Aircross.
A good ground connection is also extremely important. P116A Citroen C3 Aircross engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
P116A Citroen C3 Aircross DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 1 |
MFG - Manufacturer Specific |
| 1 |
Fuel And Air Metering |
| 6 |
Vehicle Speed Output Circuit |
| A |
TFP Valve Position Switch-Drive Without Drive Ratio |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the P116A Citroen C3 Aircross code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Citroen car models :
|
The listed Citroen models will give information about P116A DTC.
|
