P1176 DTC For Toyota Prius 3
Toyota Prius 3 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Toyota Prius 3 engine control system detects a problem, the computer stores the diagnostic trouble
code P1176 in its memory.
To figure out what is wrong with your vehicle you must first extract the P1176 DTC For Toyota Prius 3.
On 1999 and later P1176 Toyota Prius 3 engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
P1176 Toyota Prius 3 DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 1 |
MFG - Manufacturer Specific |
| 1 |
Fuel And Air Metering |
| 7 |
Exhaust Gas Recirculation System Valve 1 |
| 6 |
Transmission Control Module Reprogrammable Memory |
When you turn on the ignition, the Service Engine Soon or Check Engine P1176 Toyota Prius 3 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If P1176 DTC For Toyota Prius 3 so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the P1176!
You can also check other Toyota car models :
|
The listed Toyota models will give information about P1176 DTC.
|
