P1304 DTC For Fiat 500
Fiat 500 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | V-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Fiat 500 engine control system detects a problem, the computer stores the diagnostic trouble
code P1304 in its memory.
To figure out what is wrong with your vehicle you must first extract the P1304 DTC For Fiat 500.
A good ground connection is also extremely important. P1304 Fiat 500 engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
P1304 Fiat 500 DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 1 |
MFG - Manufacturer Specific |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 0 |
Air Conditioning (A/C) Clutch Feedback Circuit High Voltage |
| 4 |
Cruise Vehicle Speed/Set Speed Difference Too High |
The original multi-displacement system turned off opposite pairs of cylinders, allowing the engine to have three different configurations and displacements. P1304 Fiat 500 code had an elaborate diagnostics procedure, including showing engine trouble codes on the air conditionning display. However, the system was troublesome, misunderstood by customers, and a rash of unpredictable failures led to the technology being quickly retired.
You can also check other Fiat car models :
|
The listed Fiat models will give information about P1304 DTC.
|
