P1306 DTC For Toyota Mark Ii
Toyota Mark Ii Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Toyota Mark Ii engine control system detects a problem, the computer stores the diagnostic trouble
code P1306 in its memory.
To figure out what is wrong with your vehicle you must first extract the P1306 DTC For Toyota Mark Ii.
P1306 Toyota Mark Ii engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)
P1306 Toyota Mark Ii DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 1 |
MFG - Manufacturer Specific |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 0 |
Air Conditioning (A/C) Clutch Feedback Circuit High Voltage |
| 6 |
Transmission Control Module Reprogrammable Memory |
When you turn on the ignition, the Service Engine Soon or Check Engine P1306 Toyota Mark Ii light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If P1306 DTC For Toyota Mark Ii so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the P1306!
You can also check other Toyota car models :
|
The listed Toyota models will give information about P1306 DTC.
|
