P133B DTC For Fiat X1
Fiat X1 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Fiat X1 engine control system detects a problem, the computer stores the diagnostic trouble
code P133B in its memory.
To figure out what is wrong with your vehicle you must first extract the P133B DTC For Fiat X1.
On 1999 and later P133B Fiat X1 engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
P133B Fiat X1 DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 1 |
MFG - Manufacturer Specific |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 3 |
Low Coolant Circuit |
| B |
TFP Valve Position Switch-Drive Without Drive Ratio |
When you turn on the ignition, the Service Engine Soon or Check Engine P133B Fiat X1 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If P133B DTC For Fiat X1 so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the P133B!
You can also check other Fiat car models :
|
The listed Fiat models will give information about P133B DTC.
|
