P1348 DTC For Fiat Egea
Fiat Egea Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | V-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Fiat Egea engine control system detects a problem, the computer stores the diagnostic trouble
code P1348 in its memory.
To figure out what is wrong with your vehicle you must first extract the P1348 DTC For Fiat Egea.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check P1348 Fiat Egea that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
P1348 Fiat Egea DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 1 |
MFG - Manufacturer Specific |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 4 |
Control Module Throttle Actuator Position Performance |
| 8 |
Park/Neutral Postion (PNP) Switch Circuit Engine Torque Signal Circuit |
The rule of P1348 Fiat Egea code when it comes to emissions-related vehicle repair is that any modification that changes the vehicle from a certified configuration to a non-certified configuration is considered tampering: this applies to both vehicle owners and repair facilities and is, therefore, a Federal offense. Replacing a catalyst with a straight pipe is one traditional example of P1348. Likewise, overriding the OBD P1348 DTC For Fiat Egea system through the use of high-tech defeat devices or non-certified computer chips, for example, would also be considered tampering. The OBD system may, however, be repaired back to its original certified configuration with certified performance chips or appropriate aftermarket parts.
You can also check other Fiat car models :
|
The listed Fiat models will give information about P1348 DTC.
|
