P1353 DTC For Fiat 25
Fiat 25 Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | Opposed Cylinder Engine |
Engine Air Intake Process : | Turbocharged Engine |
Your Fiat 25 engine control system detects a problem, the computer stores the diagnostic trouble
code P1353 in its memory.
To figure out what is wrong with your vehicle you must first extract the P1353 DTC For Fiat 25.
A good ground connection is also extremely important. P1353 Fiat 25 engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
P1353 Fiat 25 DTC Meaning
P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
1 |
MFG - Manufacturer Specific |
3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
5 |
BBV Sensor Circuit Low Voltage |
3 |
TFP Valve Position Switch-Drive Without Drive Ratio |
When you turn on the ignition, the Service Engine Soon or Check Engine P1353 Fiat 25 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If P1353 DTC For Fiat 25 so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the P1353!
You can also check other Fiat car models :
The listed Fiat models will give information about P1353 DTC.
|