P13A0 Daihatsu Sirion DTC Code

Daihatsu Sirion Engine Specifications:

Engine Type :	Multi-Cylinder Engine
Cylinder Type :	W-Type Engine
Engine Air Intake Process :	Turbocharged Engine

Your Daihatsu Sirion engine control system detects a problem, the computer stores the diagnostic trouble code P13A0 in its memory. To figure out what is wrong with your vehicle you must first extract the P13A0 DTC For Daihatsu Sirion.

On 1999 and later P13A0 Daihatsu Sirion engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.

P13A0 Daihatsu Sirion DTC Meaning

P	Powertrain Code - Problem is related engine, transmission and emissions systems.
1	MFG - Manufacturer Specific
3	IC Module 4X Ref Circuit Intermittent, No Pulses
A	BBV Sensor Circuit Low Voltage
0	Transmission Engaged At High Throttle Angle

There are currently two main types of cylinder deactivation used today, depending on the type of engine. P13A0 Daihatsu Sirion code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.