P154E DTC For Plymouth Savoy
Plymouth Savoy Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Plymouth Savoy engine control system detects a problem, the computer stores the diagnostic trouble
code P154E in its memory.
To figure out what is wrong with your vehicle you must first extract the P154E DTC For Plymouth Savoy.
On 1999 and later P154E Plymouth Savoy engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
P154E Plymouth Savoy DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 1 |
MFG - Manufacturer Specific |
| 5 |
Auxiliary Emission Controls |
| 4 |
Control Module Throttle Actuator Position Performance |
| E |
TFP Valve Position Switch-Drive Without Drive Ratio |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P154E Plymouth Savoy code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Plymouth car models :
|
The listed Plymouth models will give information about P154E DTC.
|
