P168F DTC For Kia Mohave
Kia Mohave Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | W-Type Engine |
Engine Air Intake Process : | Turbocharged Engine |
Your Kia Mohave engine control system detects a problem, the computer stores the diagnostic trouble
code P168F in its memory.
To figure out what is wrong with your vehicle you must first extract the P168F DTC For Kia Mohave.
P168F Kia Mohave engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)
P168F Kia Mohave DTC Meaning
P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
1 |
MFG - Manufacturer Specific |
6 |
Vehicle Speed Control And Idle Control System |
8 |
Crankshaft Position Sensor Circuit Performance |
F |
TFP Valve Position Switch-Drive Without Drive Ratio |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P168F Kia Mohave code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Kia car models :
The listed Kia models will give information about P168F DTC.
|