P16BE DTC For Mercedes Clc
Mercedes Clc Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Mercedes Clc engine control system detects a problem, the computer stores the diagnostic trouble
code P16BE in its memory.
To figure out what is wrong with your vehicle you must first extract the P16BE DTC For Mercedes Clc.
On 1999 and later P16BE Mercedes Clc engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
P16BE Mercedes Clc DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 1 |
MFG - Manufacturer Specific |
| 6 |
Vehicle Speed Control And Idle Control System |
| B |
BBV Sensor Circuit Low Voltage |
| E |
TFP Valve Position Switch-Drive Without Drive Ratio |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P16BE Mercedes Clc code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Mercedes car models :
|
The listed Mercedes models will give information about P16BE DTC.
|
