P171E DTC For Mitsubishi Lancer Evo 10
Mitsubishi Lancer Evo 10 Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Mitsubishi Lancer Evo 10 engine control system detects a problem, the computer stores the diagnostic trouble
code P171E in its memory.
To figure out what is wrong with your vehicle you must first extract the P171E DTC For Mitsubishi Lancer Evo 10.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check P171E Mitsubishi Lancer Evo 10 that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
P171E Mitsubishi Lancer Evo 10 DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 1 |
MFG - Manufacturer Specific |
| 7 |
Ignition System Or Misfire |
| 1 |
IC Circuit High Voltage |
| E |
TFP Valve Position Switch-Drive Without Drive Ratio |
While fuel economy was increased, acceleration was seriously compromised, and the loss of engine vacuum led to a dangerous loss of braking assist when the P171E Mitsubishi Lancer Evo 10 code system was in four-cylinder mode. In addition to these issues, while the company proposed a hydraulically controlled system that could be switched from within the car, the version they implemented had to be manually changed in the engine compartment using hand tools.
You can also check other Mitsubishi car models :
|
The listed Mitsubishi models will give information about P171E DTC.
|
