P1878 DTC For Audi Concept
Audi Concept Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Audi Concept engine control system detects a problem, the computer stores the diagnostic trouble
code P1878 in its memory.
To figure out what is wrong with your vehicle you must first extract the P1878 DTC For Audi Concept.
On 1999 and later P1878 Audi Concept engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
P1878 Audi Concept DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 1 |
MFG - Manufacturer Specific |
| 8 |
Accelerator Pedal Position (APP) Sensor 1 Performance |
| 7 |
Exhaust Gas Recirculation System Valve 1 |
| 8 |
Park/Neutral Postion (PNP) Switch Circuit Engine Torque Signal Circuit |
When you turn on the ignition, the Service Engine Soon or Check Engine P1878 Audi Concept light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If P1878 DTC For Audi Concept so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the P1878!
You can also check other Audi car models :
|
The listed Audi models will give information about P1878 DTC.
|
