P188F DTC For Renault 20
Renault 20 Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | W-Type Engine |
Engine Air Intake Process : | Supercharged Engine |
Your Renault 20 engine control system detects a problem, the computer stores the diagnostic trouble
code P188F in its memory.
To figure out what is wrong with your vehicle you must first extract the P188F DTC For Renault 20.
A good ground connection is also extremely important. P188F Renault 20 engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
P188F Renault 20 DTC Meaning
P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
1 |
MFG - Manufacturer Specific |
8 |
Accelerator Pedal Position (APP) Sensor 1 Performance |
8 |
Crankshaft Position Sensor Circuit Performance |
F |
TFP Valve Position Switch-Drive Without Drive Ratio |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P188F Renault 20 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Renault car models :
The listed Renault models will give information about P188F DTC.
|