P1942 DTC For Mercedes Cl 600
Mercedes Cl 600 Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | V-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Mercedes Cl 600 engine control system detects a problem, the computer stores the diagnostic trouble
code P1942 in its memory.
To figure out what is wrong with your vehicle you must first extract the P1942 DTC For Mercedes Cl 600.
To solve P1942 Mercedes Cl 600 problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
P1942 Mercedes Cl 600 DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 1 |
MFG - Manufacturer Specific |
| 9 |
Transmission |
| 4 |
Control Module Throttle Actuator Position Performance |
| 2 |
Kick-Down Switch Failed Short |
The rule of P1942 Mercedes Cl 600 code when it comes to emissions-related vehicle repair is that any modification that changes the vehicle from a certified configuration to a non-certified configuration is considered tampering: this applies to both vehicle owners and repair facilities and is, therefore, a Federal offense. Replacing a catalyst with a straight pipe is one traditional example of P1942. Likewise, overriding the OBD P1942 DTC For Mercedes Cl 600 system through the use of high-tech defeat devices or non-certified computer chips, for example, would also be considered tampering. The OBD system may, however, be repaired back to its original certified configuration with certified performance chips or appropriate aftermarket parts.
You can also check other Mercedes car models :
|
The listed Mercedes models will give information about P1942 DTC.
|
