P1958 DTC For Renault Wind
Renault Wind Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Renault Wind engine control system detects a problem, the computer stores the diagnostic trouble
code P1958 in its memory.
To figure out what is wrong with your vehicle you must first extract the P1958 DTC For Renault Wind.
P1958 Renault Wind engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)
P1958 Renault Wind DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 1 |
MFG - Manufacturer Specific |
| 9 |
Transmission |
| 5 |
BBV Sensor Circuit Low Voltage |
| 8 |
Park/Neutral Postion (PNP) Switch Circuit Engine Torque Signal Circuit |
When you turn on the ignition, the Service Engine Soon or Check Engine P1958 Renault Wind light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If P1958 DTC For Renault Wind so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the P1958!
You can also check other Renault car models :
|
The listed Renault models will give information about P1958 DTC.
|
