P1973 DTC For Alfa Romeo 2300
Alfa Romeo 2300 Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | W-Type Engine |
Engine Air Intake Process : | Naturally Aspirated |
Your Alfa Romeo 2300 engine control system detects a problem, the computer stores the diagnostic trouble
code P1973 in its memory.
To figure out what is wrong with your vehicle you must first extract the P1973 DTC For Alfa Romeo 2300.
On 1999 and later P1973 Alfa Romeo 2300 engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
P1973 Alfa Romeo 2300 DTC Meaning
P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
1 |
MFG - Manufacturer Specific |
9 |
Transmission |
7 |
Exhaust Gas Recirculation System Valve 1 |
3 |
TFP Valve Position Switch-Drive Without Drive Ratio |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P1973 Alfa Romeo 2300 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Alfa car models :
The listed Alfa models will give information about P1973 DTC.
|