P198F DTC For Mercedes Cl 63
Mercedes Cl 63 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | V-Type Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Mercedes Cl 63 engine control system detects a problem, the computer stores the diagnostic trouble
code P198F in its memory.
To figure out what is wrong with your vehicle you must first extract the P198F DTC For Mercedes Cl 63.
A good ground connection is also extremely important. P198F Mercedes Cl 63 engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
P198F Mercedes Cl 63 DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 1 |
MFG - Manufacturer Specific |
| 9 |
Transmission |
| 8 |
Crankshaft Position Sensor Circuit Performance |
| F |
TFP Valve Position Switch-Drive Without Drive Ratio |
The original multi-displacement system turned off opposite pairs of cylinders, allowing the engine to have three different configurations and displacements. P198F Mercedes Cl 63 code had an elaborate diagnostics procedure, including showing engine trouble codes on the air conditionning display. However, the system was troublesome, misunderstood by customers, and a rash of unpredictable failures led to the technology being quickly retired.
You can also check other Mercedes car models :
|
The listed Mercedes models will give information about P198F DTC.
|
