P1A24 DTC For Subaru Outback 3
Subaru Outback 3 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Subaru Outback 3 engine control system detects a problem, the computer stores the diagnostic trouble
code P1A24 in its memory.
To figure out what is wrong with your vehicle you must first extract the P1A24 DTC For Subaru Outback 3.
On 1999 and later P1A24 Subaru Outback 3 engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
P1A24 Subaru Outback 3 DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 1 |
MFG - Manufacturer Specific |
| A |
Transmission |
| 2 |
Cruise Control Servo Indicates Low |
| 4 |
Cruise Vehicle Speed/Set Speed Difference Too High |
When you turn on the ignition, the Service Engine Soon or Check Engine P1A24 Subaru Outback 3 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If P1A24 DTC For Subaru Outback 3 so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the P1A24!
You can also check other Subaru car models :
|
The listed Subaru models will give information about P1A24 DTC.
|
