P1E14 DTC For Seat Cordoba 2
Seat Cordoba 2 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Seat Cordoba 2 engine control system detects a problem, the computer stores the diagnostic trouble
code P1E14 in its memory.
To figure out what is wrong with your vehicle you must first extract the P1E14 DTC For Seat Cordoba 2.
A good ground connection is also extremely important. P1E14 Seat Cordoba 2 engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
P1E14 Seat Cordoba 2 DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 1 |
MFG - Manufacturer Specific |
| E |
Transmission |
| 1 |
IC Circuit High Voltage |
| 4 |
Cruise Vehicle Speed/Set Speed Difference Too High |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P1E14 Seat Cordoba 2 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Seat car models :
|
The listed Seat models will give information about P1E14 DTC.
|
