P1E42 DTC For Chevrolet Cobalt
Chevrolet Cobalt Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Chevrolet Cobalt engine control system detects a problem, the computer stores the diagnostic trouble
code P1E42 in its memory.
To figure out what is wrong with your vehicle you must first extract the P1E42 DTC For Chevrolet Cobalt.
To solve P1E42 Chevrolet Cobalt problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
P1E42 Chevrolet Cobalt DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 1 |
MFG - Manufacturer Specific |
| E |
Transmission |
| 4 |
Control Module Throttle Actuator Position Performance |
| 2 |
Kick-Down Switch Failed Short |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P1E42 Chevrolet Cobalt code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Chevrolet car models :
|
The listed Chevrolet models will give information about P1E42 DTC.
|
