P1E4A DTC For Seat Cordoba 2
Seat Cordoba 2 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | W-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Seat Cordoba 2 engine control system detects a problem, the computer stores the diagnostic trouble
code P1E4A in its memory.
To figure out what is wrong with your vehicle you must first extract the P1E4A DTC For Seat Cordoba 2.
On 1999 and later P1E4A Seat Cordoba 2 engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
P1E4A Seat Cordoba 2 DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 1 |
MFG - Manufacturer Specific |
| E |
Transmission |
| 4 |
Control Module Throttle Actuator Position Performance |
| A |
TFP Valve Position Switch-Drive Without Drive Ratio |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P1E4A Seat Cordoba 2 code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Seat car models :
|
The listed Seat models will give information about P1E4A DTC.
|
