P3190 DTC For Renault Logan
Renault Logan Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | V-Type Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Renault Logan engine control system detects a problem, the computer stores the diagnostic trouble
code P3190 in its memory.
To figure out what is wrong with your vehicle you must first extract the P3190 DTC For Renault Logan.
P3190 Renault Logan engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)
P3190 Renault Logan DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 3 |
SAE - Generic |
| 1 |
Fuel And Air Metering |
| 9 |
TP Sensor Learn Not Complete |
| 0 |
Transmission Engaged At High Throttle Angle |
The original multi-displacement system turned off opposite pairs of cylinders, allowing the engine to have three different configurations and displacements. P3190 Renault Logan code had an elaborate diagnostics procedure, including showing engine trouble codes on the air conditionning display. However, the system was troublesome, misunderstood by customers, and a rash of unpredictable failures led to the technology being quickly retired.
You can also check other Renault car models :
|
The listed Renault models will give information about P3190 DTC.
|
