P3342 DTC For Buick 90
Buick 90 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Buick 90 engine control system detects a problem, the computer stores the diagnostic trouble
code P3342 in its memory.
To figure out what is wrong with your vehicle you must first extract the P3342 DTC For Buick 90.
To solve P3342 Buick 90 problem, you'll have to remove the muffler, crankcase and other components blocking the valve chamber. Then, remove the cylinder head bolts (label for easy re-installation) Adjust the jaws of the valve spring compressor until they touch the top and bottom of the valve chamber Push the tool in to compress the spring and tighten the jaws Remove the retainers and lift out the valves , compressors and springs
P3342 Buick 90 DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 3 |
SAE - Generic |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 4 |
Control Module Throttle Actuator Position Performance |
| 2 |
Kick-Down Switch Failed Short |
When you turn on the ignition, the Service Engine Soon or Check Engine P3342 Buick 90 light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If P3342 DTC For Buick 90 so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the P3342!
You can also check other Buick car models :
|
The listed Buick models will give information about P3342 DTC.
|
