P3350 DTC For Chevrolet Montana
Chevrolet Montana Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | V-Type Engine |
| Engine Air Intake Process : | Turbocharged Engine |
Your Chevrolet Montana engine control system detects a problem, the computer stores the diagnostic trouble
code P3350 in its memory.
To figure out what is wrong with your vehicle you must first extract the P3350 DTC For Chevrolet Montana.
A good ground connection is also extremely important. P3350 Chevrolet Montana engine problem because the presence of voltage at the panel harness won't make the panel work if there is a bad ground connection. Since the instrument cluster is mounted in a plastic dash, a separate ground wire or ground circuit through the wiring harness is usually needed to complete the power circuit. Refer again to the wiring diagram to find the ground path, and then check it with your ohmmeter. Do not use a self-powered test light because it cannot measure resistance (any resistance will lower circuit voltage).
P3350 Chevrolet Montana DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 3 |
SAE - Generic |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 5 |
BBV Sensor Circuit Low Voltage |
| 0 |
Transmission Engaged At High Throttle Angle |
The original multi-displacement system turned off opposite pairs of cylinders, allowing the engine to have three different configurations and displacements. P3350 Chevrolet Montana code had an elaborate diagnostics procedure, including showing engine trouble codes on the air conditionning display. However, the system was troublesome, misunderstood by customers, and a rash of unpredictable failures led to the technology being quickly retired.
You can also check other Chevrolet car models :
|
The listed Chevrolet models will give information about P3350 DTC.
|
