P3385 DTC For Chevrolet Kodiak
Chevrolet Kodiak Engine Specifications:
| Engine Type : | Single Cylinder Engine |
| Cylinder Type : | Opposite Piston Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Chevrolet Kodiak engine control system detects a problem, the computer stores the diagnostic trouble
code P3385 in its memory.
To figure out what is wrong with your vehicle you must first extract the P3385 DTC For Chevrolet Kodiak.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check P3385 Chevrolet Kodiak that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
P3385 Chevrolet Kodiak DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 3 |
SAE - Generic |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 8 |
Crankshaft Position Sensor Circuit Performance |
| 5 |
Cruise Inhibit Control Circuit |
If your vehicle failed a P3385 Chevrolet Kodiak test and the P3385 Check Engine Light is NOT on, chances are you have a problem with the OBDII system, a burned out MIL lamp, or a faulty catalytic converter. The converter is essentially an afterburner that cleans up the exhaust after it exits the engine. The OBDII system uses P3385 a ownstream oxygen sensor to monitor the efficiency of the converter, and it should detect a drop in converter efficiency if the converter has been contaminated or is failing (ignition misfiring, leaky exhaust valves, and oil burning can all damage the converter). What you want to look P3385 DTC For Chevrolet Kodiak: Any conditions that might cause ignition misfire, an overly rich or lean fuel condition, or loss of compression.
You can also check other Chevrolet car models :
|
The listed Chevrolet models will give information about P3385 DTC.
|
