P3391 DTC For Chevrolet Captiva
Chevrolet Captiva Engine Specifications:
Engine Type : | Multi-Cylinder Engine |
Cylinder Type : | W-Type Engine |
Engine Air Intake Process : | Supercharged Engine |
Your Chevrolet Captiva engine control system detects a problem, the computer stores the diagnostic trouble
code P3391 in its memory.
To figure out what is wrong with your vehicle you must first extract the P3391 DTC For Chevrolet Captiva.
Do you have fresh, clean fuel in the tank? If it's empty, fill it up and go! If it's full, check P3391 Chevrolet Captiva that the fuel shut-off valve is open and that it is clean. Stale fuel, dirt and debris are the most common cause of outdoor power equipment not starting properly. If you store equipment with untreated gas in the tank, it can lead to engine damage.
P3391 Chevrolet Captiva DTC Meaning
P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
3 |
SAE - Generic |
3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
9 |
TP Sensor Learn Not Complete |
1 |
PCM Stack Overrun |
There are currently two main types of cylinder deactivation used today, depending on the type of engine. P3391 Chevrolet Captiva code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.
You can also check other Chevrolet car models :
The listed Chevrolet models will give information about P3391 DTC.
|