P3393 DTC For Chevrolet Trailblazer 2
Chevrolet Trailblazer 2 Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposite Piston Engine |
| Engine Air Intake Process : | Naturally Aspirated |
Your Chevrolet Trailblazer 2 engine control system detects a problem, the computer stores the diagnostic trouble
code P3393 in its memory.
To figure out what is wrong with your vehicle you must first extract the P3393 DTC For Chevrolet Trailblazer 2.
On 1999 and later P3393 Chevrolet Trailblazer 2 engines, the instrument cluster has a built-in self-diagnostic mode that can be accessed by pressing and holding the instrument cluster SELECT/RESET button. Insert the ignition key and turn to the RUN position (but don't crank or start engine). Continue to press and hold the SELECT/RESET button (for 5 seconds) until the word TEST is displayed by the odometer. Release the SELECT/RESET button within three seconds after the word TEST is displayed to begin the self-diagnostic mode.
P3393 Chevrolet Trailblazer 2 DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 3 |
SAE - Generic |
| 3 |
IC Module 4X Ref Circuit Intermittent, No Pulses |
| 9 |
TP Sensor Learn Not Complete |
| 3 |
TFP Valve Position Switch-Drive Without Drive Ratio |
If your P3393 Chevrolet Trailblazer 2 check engine light is illuminated, it's best to take it in for diagnostic testing, which can feel like a hassle. Because while the lights vary in appearance from vehicle to vehicle, all have the same basic meaning: There's a problem with the car's emissions system. The on-board diagnostics system P3393 and engine control unit are in charge of monitoring a bunch of different P3393 DTC For Chevrolet Trailblazer 2, and if they get a reading that's a little out of whack, up pops the check engine light.
You can also check other Chevrolet car models :
|
The listed Chevrolet models will give information about P3393 DTC.
|
