P341E DTC For Toyota Land Cruiser
Toyota Land Cruiser Engine Specifications:
| Engine Type : | Multi-Cylinder Engine |
| Cylinder Type : | Opposed Cylinder Engine |
| Engine Air Intake Process : | Supercharged Engine |
Your Toyota Land Cruiser engine control system detects a problem, the computer stores the diagnostic trouble
code P341E in its memory.
To figure out what is wrong with your vehicle you must first extract the P341E DTC For Toyota Land Cruiser.
P341E Toyota Land Cruiser engine problem can be occur defective fan clutches are a common and often overlooked cause of engine overheating. The shear characteristics of the clutch fluid gradually deteriorates over time, with an average loss in drive efficiency of about 200 rpm per year. Eventually slippage reaches the point where effective cooling is no longer possible and overheating results. (On average, the life of a fan clutch is about the same as a water pump. If one needs to be replaced, the other usually does too.)
P341E Toyota Land Cruiser DTC Meaning
| P |
Powertrain Code - Problem is related engine, transmission and emissions systems. |
| 3 |
SAE - Generic |
| 4 |
Fuel And Air Metering (Injector Circuit Malfunctions Only) |
| 1 |
IC Circuit High Voltage |
| E |
TFP Valve Position Switch-Drive Without Drive Ratio |
When you turn on the ignition, the Service Engine Soon or Check Engine P341E Toyota Land Cruiser light should flash briefly, indicating that the OBD system is ready to scan your vehicle for any malfunctions. After this brief flash, the light should stay off while you drive as long as no problems are detected. If P341E DTC For Toyota Land Cruiser so, you'll be glad to know that your vehicle is equipped with an early warning system that could save you time, money, and fuel in addition to helping protect the P341E!
You can also check other Toyota car models :
|
The listed Toyota models will give information about P341E DTC.
|
